點擊圖片查看大圖
| Compare | Contact Us | |
| NORYL GTX? Resin | ||
| Grades |
De |
|
| GTX4610 |
PPE+PA, Glass, Datasheet Product Data: Auto Data: |
|
| GTX673 |
PPE+PA, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX678 |
PPE+PA, Flame Retardant, Conductive, Heat Stabilized, Impact Modified, Nonhalogenated, Datasheet Product Data: Auto Data: |
|
| GTX8730 |
PPE+PA, Glass, Conductive, Datasheet Product Data: Auto Data: |
|
| GTX902D |
NORYL GTX902D is a GTX902E with smaller shaped pellets. Datasheet Product Data: Auto Data: |
|
| GTX975 |
18% mineral filled conductive NORYL GTX. Datasheet Product Data: Auto Data: |
|
| GTX989 |
PPE+PA, Conductive, High Impact, Datasheet Product Data: Auto Data: Auto Specification |
|
| NX0031 |
PPE+PA, conductive with high impact Datasheet Product Data: Auto Data: |
|
NORYL GTX ? Resin GTX674PC |
SI | | British | | Metric | Americas: COMMERCIAL |
| A conductive PPE/PA blend designed to have improved surface appearance and elevated heat resistance for powder coating. The material is suitable for injection molding. The material is only available in black. |
|
Property |
| TYPICAL PROPERTIES (1) | ||||
| MECHANICAL | Value | Unit | Standard | |
| Tensile Stress, yld, Type I, 50 mm/min | 660 | kgf/cm2 | ASTM D 638 | |
| Tensile Stress, brk, Type I, 50 mm/min | 650 | kgf/cm2 | ASTM D 638 | |
| Tensile Strain, yld, Type I, 50 mm/min | 3 | % | ASTM D 638 | |
| Tensile Strain, brk, Type I, 50 mm/min | 4 | % | ASTM D 638 | |
| Tensile Modulus, 5 mm/min | 28600 | kgf/cm2 | ASTM D 638 | |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 1110 | kgf/cm2 | ASTM D 790 | |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 29400 | kgf/cm2 | ASTM D 790 | |
| Tensile Stress, break, 50 mm/min | 60 | MPa | ISO 527 | |
| Tensile Strain, yield, 50 mm/min | 3 | % | ISO 527 | |
| Tensile Strain, break, 50 mm/min | 4 | % | ISO 527 | |
| Flexural Stress, yield, 2 mm/min | 103 | MPa | ISO 178 | |
| Flexural Modulus, 2 mm/min | 2480 | MPa | ISO 178 | |
| IMPACT | Value | Unit | Standard | |
| Izod Impact, notched, 23°C | 7 | cm-kgf/cm | ASTM D 256 | |
| Izod Impact, notched, -30°C | 5 | cm-kgf/cm | ASTM D 256 | |
| Instrumented Impact Total Energy, 23°C | 40 | cm-kgf | ASTM D 3763 | |
| THERMAL | Value | Unit | Standard | |
| Vicat Softening Temp, Rate B/50 | 197 | °C | ASTM D 1525 | |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 188 | °C | ASTM D 648 | |
| CTE, -40°C to 40°C, flow | 7.6E-05 | 1/°C | ASTM E 831 | |
| CTE, -40°C to 40°C, xflow | 7.8E-05 | 1/°C | ASTM E 831 | |
| CTE, 23°C to 80°C, flow | 8.1E-05 | 1/°C | ISO 11359-2 | |
| CTE, 23°C to 80°C, xflow | 8.6E-05 | 1/°C | ISO 11359-2 | |
| Vicat Softening Temp, Rate B/50 | 197 | °C | ISO 306 | |
| Vicat Softening Temp, Rate B/120 | 196 | °C | ISO 306 | |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 185 | °C | ISO 75/Bf | |
| PHYSICAL | Value | Unit | Standard | |
| Specific Gravity | 1.11 | - | ASTM D 792 | |
| Mold Shrinkage, flow, 3.2 mm (5) | 1 - 1.3 | % | SABIC Method | |
| Melt Flow Rate, 300°C/5.0 kgf | 25 | g/10 min | ASTM D 1238 | |
| ELECTRICAL | Value | Unit | Standard | |
| Volume Resistivity | 1.E+03 - 1.E+04 | Ohm-cm | SABIC Method | |
| Source GMD, last updated:2006/06/27 |
|
Processing |
| ? Do NOT mix NORYL GTX* resin with other grades of NORYL* resins. |
| Parameter | ||
| Injection Molding | Value | Unit |
| Drying Temperature | 95 - 105 | °C |
| Drying Time | 3 - 4 | hrs |
| Drying Time (Cumulative) | 8 | hrs |
| Maximum Moisture Content | 0.07 | % |
| Minimum Moisture Content | 0.02 | % |
| Melt Temperature | 280 - 305 | °C |
| Nozzle Temperature | 280 - 305 | °C |
| Front - Zone 3 Temperature | 275 - 305 | °C |
| Middle - Zone 2 Temperature | 270 - 305 | °C |
| Rear - Zone 1 Temperature | 265 - 305 | °C |
| Mold Temperature | 75 - 120 | °C |
| Back Pressure | 0.3 - 1.4 | MPa |
| Screw Speed | 20 - 100 | rpm |
| Shot to Cylinder Size | 30 - 50 | % |
| Vent Depth | 0.013 - 0.038 | mm |
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換