進口不銹鋼緊急切斷電磁閥
德國泰科閥門(國際)有限公司—廣州總代理
德國泰科T E K閥門主要產品有:┃進口燃氣電磁閥┃進口燃氣螺紋不銹鋼電磁閥┃進口燃氣高壓法蘭不銹鋼電磁閥┃進口燃氣先導式不銹鋼電磁閥┃進口高壓不銹鋼電磁閥┃進口高壓高溫不銹鋼電磁閥┃進口高壓零壓差不銹鋼電磁閥等。
DN25-100mm不銹鋼緊急切斷電磁閥參數:
原理結構:分步直動導向活塞式
線圈工作溫度:<+50℃、<+85℃
控制方式:
常開(通電關閉,人工手動打開)
常閉(斷電關閉,通電時人工手動打開,24小時通電);
國際標準電壓:AC220V、DC24V、DC12V
流通流體介質:天然氣、石油液化氣、瓦斯、沼氣、煤氣等
流通流體溫度:<-40℃、<+60℃、<+120℃
流通流體壓力:0.5bar、1bar 、2bar 、6bar 、10bar、16bar
閥體材質:不銹鋼(304、316)、鑄鋼(WCB)
線圈連接方式:防爆鐵罩三芯雙護套電纜(引線式、封閉式)
密封材質性能:耐溫、耐壓、耐磨、防腐
連接方式:法蘭
密封結構:圓弧錐線與平面密封
泄漏量:零
關閉時間:1-3秒鐘以內
性能特點:通用性廣、靈敏性高、嚴密性強、安全性高、壽命性長
工作范圍:天然氣自控、煤氣自控、石油液化氣自控、沼氣自控、燃氣設備、乙醛設備及燃氣設備等
注解:
1、流體中若含有雜質,電磁閥進端必須安裝過濾閥(30——80目/寸),且無凝固及結晶現象。
2、電磁閥安裝方位制。(S-水平安裝、C-垂直安裝)
防爆線圈說明:
防爆電磁閥是工作在較特殊環境的電磁閥,用戶必須根據國家防爆標準選擇電磁閥。以保證生命及財產安全。
德國泰科生產的防爆電磁閥已通過《中家防爆電氣產品質量監督檢驗中心》的檢驗并取得防爆電磁閥產品合格證
一、中防爆電磁閥(隔爆型)
防爆標志:EXdⅡCT5
制造標準:GB3836.1-2000、GB3836.2-2000
防爆殼溫 度:≤95℃
線口尺寸:內螺紋M16X1.5(小功率)、M22X1.5(大功率)German TEK TEK valve main products are: ┃ imports of gas imported gas solenoid valve solenoid valve ┃ threaded stainless steel flange stainless steel imported gas pressure solenoid valve ┃ imported gas pilot solenoid valve stainless steel high-pressure solenoid valve ┃ imported imported high-pressure high-temperature stainless steel solenoid zero differential pressure valve ┃ imported stainless steel high-pressure solenoid valve.
DN25-100mm stainless steel emergency shut-off solenoid valve parameters:
Principle structure: direct-action step guide piston
Coil Operating temperature: <+50 ℃, <+85 ℃
Control: Normally open (powered off manually open); normally closed (power off, power is manually opened 24 hours energized);
International Standard voltage: AC220V, DC24V, DC12V
Circulating fluid medium: natural gas, liquefied petroleum gas, gas, gas, gas, etc.
Circulating fluid temperature: <-40 ℃, <+60 ℃, <+120 ℃
Circulating fluid pressure: 0.5bar, 1bar, 2bar, 6bar, 10bar, 16bar
Body material: stainless steel (304,316), cast steel (WCB)
Coil connection: Ex iron cover three core double sheathed cable (wire, closed)
Seal Material performance: temperature, pressure, abrasion, corrosion
Connection: flange
Sealing structure: circular cone line and flat seal
Leakage: Nil
Close Time :1-3 seconds or less
Features: wide versatility, high sensitivity, tight and strong, safe, long-life nature
Scope of work: Gas Controls, Gas Controls, liquefied petroleum gas automation, automatic control of biogas, gas equipment, gas equipment, facilities and acetaldehyde
Note: 1, If ??the fluid contains impurities, solenoid valves must be installed into the end of the filter valve (30 - 80 mesh / inch), and no solidification and crystallization.
2, the solenoid valve installation position limit. (S-horizontal installation, C-vertical installation)
Ex Coil Description:
Explosion-proof solenoid valve is working in more specific environments solenoid valve, the user must choose according to national standards for explosion proof solenoid valves. To ensure the safety of life and property. German TEK produced proof solenoid valves has passed the "National Explosion Protected Electrical Products Quality Supervision and Inspection Center" test and obtain proof solenoid valve product certification
First, the senior proof solenoid valves (explosion-proof)
進口不銹鋼緊急切斷電磁閥